The T-fal Metallic Cookware collection is a sleek, high-quality collection that features a beautiful bronze metallic non-stick exterior coating and glossy lacquered handles. The Expert non-stick interior is easy to clean and is safe for use with metal utensils.
Thermo-Spot® (pans only) turns full red when the pan has reached the ideal temperature for perfect searing. It guarantees perfect texture, perfect color and perfect taste, for delicious full-flavored meals every day.
PFOA-, Lead-, and Cadmium-free, the cookware’s durable nonstick surfaces—inside and out—offer effortless food release (little to no fat needed), quick and easy cleaning, and a healthier choice when it comes to cookware.
The glossy lacquered handles are fixed with no inside rivets to trap food.
Dishwasher safe for easy clean-up. Oven safe to 350°F; Lifetime Limited Warranty.
Non-stick utensils are specially designed so that food does not stick. However, the frying pan or saucepan has to be properly maintained. For that purpose, please observe the following tips: slightly oil the frying pan/saucepan before first use and then wash and dry it, repeat the process from time to time if you wash the frying pan/saucepan regularly in the dishwasher. It is also necessary to avoid overheating and scratches, in particular due to use of metal accessories (spatulas, ladles) and/or due to cleaning with a scouring sponge.
Only frying pans, saucepans or saute pans from the Ingenio range can go in the oven, thanks to their detachable handles (ensure that the detachable handle is removed). Utensils should never be used in a microwave or convection oven.
• Wash the frying pan in hot water and washing-up liquid to remove any dust. Dry it and rub a little cooking oil into the non-stick coating before using for the first time. Remove any excess oil. • Wash and dry your kitchenware after each use.
For frying pans: between 140 °C and 195 °C For crepe pans: between 165 °C and 240 °C This is the optimum temperature for frying and searing food. This indication helps you cook healthier and at an ideal temperature.
Oiling' means covering the kitchenware with a thin layer of oil. Before using it for the first time, wash your kitchenware in water and dry it. Warm it over a very low heat for 30 seconds, remove it from the heat and add a dessertspoon of vegetable oil. Spread the oil over the entire surface with a paper serviette. This process should be repeated regularly if you use a dishwasher.
You should refer to the recommendations for use indicated on the packaging or in the instructions included with the product. With some ranges, you can use certain metal utensils with the exception of knives and whisks. However, to extend the life of your frying pans and saucepans, we strongly recommend that you do not use metal. Choose plastic or wood.
The non-stick properties of the ceramic coating are a lot more limited, both in terms of performance and duration, than those of the classic (PTFE) coating. We recommend cooking with more fat as well as washing more vigorously with slightly more washing-up liquid. For baked-on food, we recommend leaving your kitchenware to soak in soapy water, possibly with a little white vinegar. Over time, the ceramic base will become stained without it being possible to remove the marks. This will not impair the performance of the kitchenware in any way and does not present any danger for health.
• Use plastic or wood utensils, with some ranges, you can use certain metal utensils with the exception of knives and whisks (Refer to the recommendations for use indicated on the packaging or in the instructions included with the product). • Avoid cutting directly in the pans. • Do not gouge the non-stick surface. Slight surface marks or abrasions are normal and will not affect the cookwares performance. • After cooking, do not let pans boil dry and do not leave empty pans on a heated burner. • Always select the proper electric burner size or adjust the gas burner so the flame only touches the bottom of the pan and does not climb up the sides. • Never leave pans unattended while cooking. • Let pans cool before cleaning.
A pan warps under thermal shock (an overheated empty pan, a hot pan in contact with cold water or placed on a cold surface, etc.). Before cleaning the pan, let it cool to room temperature. A warped pan will give poor cooking results.
Depending on the range (check the packaging), most metal utensils can be used except knives, forks and whisks. However, care should be exercised when using any metal utensil. Avoid using sharp edged utensils and avoid cutting directly in the pan. Do not stab or gouge the non-stick surface.
Yes. High temperature can burn food, producing stains and causing the pan to warp. In addition, overheating may result in a loss of non-stick performance. A moderate temperature is sufficient for cooking, because aluminium heats up evenly. Heating the pan to a very high temperature, with nothing in it, can cause damage.
No. Cooking at high temperature does not result in a significant decrease in cooking time and certainly does not contribute to the quality of the food, so cooking at medium temperatures is highly recommended. Another reason for this recommendation is that high temperature cooking might damage the non-stick coating.
Non-stick pan: Cleaning by hand in soapy water is enough. The pan must be cleaned each time it's used to remove the film of grease that can stay on the surface. If the pan is only wiped with a paper towel or rinsed in water, the film won't be fully removed and may cook the next time you use the pan: stains may appear. Non-stick pans must not be cleaned with scouring powders or scouring pads. A nylon sponge is ideal for both the interior and exterior of the pan.
Ceramic pan: We recommend to wash the ceramic pan manually, with water and a mild detergent. In this way, it’s the most effective. If the pan might not be clean enough during the normal dishes, you could add a splash of vinegar and water into the pan and heat it. The water / vinegar mixture will clean cook the pan. After this, rinse the pan well, dry and rub with a little bit of sunflower oil for example. And your pan will be as new. If the base is stubborn dirt, you can wet the pan soak first with hot water and a good degreasing dishwashing detergent. Next, if necessary, you can clean the pan with a plastic scouring pad and some liquid abrasive cleaning detergent.
For cookware with exposed copper surfaces, do not allow copper cookware to air dry. This will cause your cookware to get spots that are hard to get clean. Copper will tarnish over time. Clean with a commercial cleaning agent. It is highly recommended that you towel dry your cookware immediately after washing it. Copper does scratch and dent rather easily, so be a little extra careful when handling and storing the pots and pans after use.
Some parts are dishwasher-safe and other parts aren't. (Please see below.) If it is dishwasher-safe, please use a neutral detergent when cleaning. Some dishwashers may not be compatible with pots/frying pans so please check the instruction manual of your dishwasher before use. Dishwasher Compatibility: Pot/frying pan part: YES Special handle: YES Cooking lid: (excluding knob of magnet-types): YES Detachable lid knobs of magnet-types: NO (It may result in rusting) Storage seal lid: NO (It may result in deformation) To prolong the life of your pan, we recommend hand washing with a non-abrasive sponge. Dishwasher use: it is preferable to use gentle detergents such as a liquid or gel.
• A build up of food deposits/residue may have formed on the pan which may originally be the result of an item of food being allowed to overcook in the pan. This can normally be cleaned by filling the pan with water and washing up liquid and leaving overnight. Then use a paste made up of bicarbonate of soda and water rubbed gently over the pan with a non-abrasive sponge (a non-stick scouring sponge). The non-stick coating should then be reconditioned with a little cooking oil wiped over the surface with a paper kitchen towel. • The frying pan may have been overheated causing damage and discolouration to the non-stick coating. When pans are regularly overheated this will lead to a weakening of the non-stick coating. The red Thermo-Spot in frypans is a heat indicator and tells you when the pan has reached the perfect cooking temperature. When the spot turns solid red reduce the heat to maintain the temperature. Do not continue to heat the pan on a high heat as this will result in the pan and the non-stick surface becoming overheated. • If cleaned in a dishwasher, after each use re-coat the non-stick interior with cooking oil to prevent the non-stick from drying out and ensure the best non-stick performance.
• The pan has been used on too high a heat or the wrong source of heat for the pan which has resulted in the pan base becoming warped and distorted. • Also never put cold water into a hot pan or plunge hot cookware in cold water. Sudden changes of temperature may cause the metal to warp, resulting in an uneven base.
Take care when placing pans on gas hobs as the number of support legs vary and small pans in particular may need a trivet, which most gas hob manufacturers will supply with their hob or can be bought from the separately.
Excessive force on the outside of aluminium pots or frying pans resulting, for example, from them being dropped or hit may result in deformations of the pots/pans. (The pot/frying pan will not deform as result of cooking heat.)
Our coatings are famous for not deteriorating under normal conditions of use. If Tefal/T-fal frying pans or saucepans are not used correctly and a particle of coating is inadvertently swallowed, there is no health risk associated as the particles are non-toxic. They will pass through the body without being absorbed, like any other fibre. In fact, the non-stick coating is so safe that it is often used by the medical profession to coat pacemakers and the tiny tubes made to replace arteries.
All non-stick coatings contain PTFE, the abbreviation for polytetrafluorethylene, a plastic polymer. It is a slippery ingredient, made up of molecules of tetra fluoro ethylene that only contain carbon and fluorine. The non-stick coating is not attacked by acid or alkaline bases and remains stable on cooking. The French, European and American health authorities have approved the use of PTFE non-stick coatings for kitchenware. In fact, it is a substance that does not produce any chemical reaction when it comes into contact with food, water or cleaning products. In the event of absorption, it is completely harmless for the body. It passes through the body without being absorbed, like any other fibre. In fact, the non-stick coating is so safe from a health point of view that it is often used by the medical profession to coat pacemakers and tiny tubes replacing arteries.
NO. Cookware items with Tefal/T-fal non-stick coating do not contain PFOA. This is regularly checked by independent laboratories, which verify the absence of PFOA in the finished products. Since 2003, tests have regularly been performed by independent laboratories in many countries (INERIS in France, ASAHI GLASS FLUOROPOLYMERS in the UK, FABES Labs in Germany, MB Labs in Canada and SGS in China). These tests have systematically proven the absence of PFOA in products with Tefal/T-fal non-stick coating.
It is very rare for the non-stick coating to wear off under normal household use. Proper use and care will allow for better performance over time. Most cases of non-stick wearing have evidence of overheating, scratching and/or abrasive cleaning. Excessive overheating can cause the pan's surface to dry up and flake. This type of damage is not covered by the guarantee. If you occasionally use high heat or have over-heated your pans, we recommend that you season your cookware more often.
The SEB Group, as part of its commitment to Quality, has included "Health and Environment" Eco information on its non-stick Tefal/T-fal products. This commitment guarantees the absence of PFOA, lead and cadmium in Tefal/T-fal coatings and the guarantees that our non-stick products are harmless for the environment and the consumer. This Eco information is based on the regular analysis conducted by independent laboratories in many countries (INERIS in France, ASAHI GLASS FLUOROPOLYMERS in UK, FABES Labs in Germany, MB Labs in Canada, SGS in China) (link to the lab sites).This commitment can be found on the website of the Tefal/T-fal brand, as well as the packaging of cookware with non-stick Tefal/T-fal coating.
There is, at the moment, much confusion about non-stick coatings, which are sometimes related to PFOA. However, Tefal/T-fal non-stick coatings are made of PTFE, the abbreviation of the scientific name Polytetrafluoroethylene, and this material is recognised as harmless by public health agencies in Europe and in the United States. PFOA and PTFE are two completely different elements. In summary, cookware with Tefal/T-fal non-stick coatings are made of PTFE and do not contain PFOA. Furthermore, for more than 20 years, Tefal/T-fal made a commitment not to use lead or cadmium in the whole of its cookware range in order to serve as a guarantee of the harmlessness of all its products. You will find this commitment through Eco information set up by the Group SEB.
PFOA is the standard English abbreviation of perfluorooctanoic acid. PFOA is used in the manufacturing process of many products such as non-stick coatings, compatible microwave packaging, some textiles, stain resistant carpet, pizza boxes which do not absorb fat, etc. On its finished products, Tefal/T-fal's commitment is to guarantee the absence of PFOA, lead and cadmium and to guarantee that its products with Tefal/T-fal non-stick coating are harmless for the environment and the consumer.
There is neither cadmium nor lead in the non-stick coatings and enamel of our Tefal/T-fal cookware. We noticed that these harmful substances can leak out when the product is washed in the dishwasher, then re-settle on all the utensils in the dishwasher. Using these utensils for eating or cooking causes you to ingest cadmium or lead, which then stays in the body. For that reason, all of our cookware has been designed and manufactured without lead or cadmium for more than 20 years. You can find this Eco information on the packaging of all our products with Tefal/T-fal non-stick coating.
Tefal/T-fal non-stick coating is a technical coating made from a polymer name polytetrafluoroethylene (PTFE). It is PTFE which gives the cookware the non-stick properties. Public health authorities in Europe and in the USA demonstrated that PTFE is an inert substance which does not chemically react with food, water or domestic cleaning products. It is totally harmless in case of ingestion. These Public health authorities confirmed the harmlessness of PTFE non-stick coatings in cookware. In fact, PTFE is so safe that it is frequently used in the medical profession to coat pacemakers and the tiny tubes made to replace arteries. It is also used for surgical procedures for the benefit of patients with severe kidney disease, and some joint prostheses are also partly coated with PTFE.
The quick way to check whether your pans work on an induction hob is to do the magnet test on the pans. This is easy, if a magnet will stick to the base of the pans they will work on a commercial induction hob.
It is difficult to give a number of years, because the service life will differ depending on the conditions of usage and frequency of use. To extend its service life, you should protect it from unnecessarily high temperatures and refrain from heating with no water inside. A medium to low heat is sufficient. If you are cooking at the same temperature as you would when using an iron wok, damage will occur rapidly. Do not store cooked food for a long time (one day or longer).
Delete my cart
Do you really want to delete all items from your cart?